Discussion:
[edk2] New edk2-devel email list transition
Jordan Justen
2015-07-14 22:25:01 UTC
Permalink
Just to pick a transition time, let's change over ~2 days from now.

In various time zones:

$ TZ='UTC' date -d @1437087600
Thu Jul 16 23:00:00 UTC 2015

$ TZ='America/Los_Angeles' date -d @1437087600
Thu Jul 16 16:00:00 PDT 2015

$ TZ='Asia/Shanghai' date -d @1437087600
Fri Jul 17 07:00:00 CST 2015

For your local time, try:
$ date -d @1437087600

To subscribe to the new list:
https://lists.01.org/mailman/listinfo/edk2-devel

Let's try to not use the new list until then to let people have one
last chance to subscribe. Shortly after the cut-off, we'll reject
email sent to the old list.

-Jordan
Due to community feedback, a new mailing list is being set up to replace
this one. The new list will be hosted on Lists.01.org and should be more
stable and consistent than this one.
The host has an opt-in policy and will not allow the current
subscription list to be imported so you will need to subscribe yourself.
The timing of the final conversion to the new list is still to be
determined, but in the meantime you can sign up for the new list
here: https://lists.01.org/mailman/listinfo/edk2
Please keep all relevant communications on this channel and do not use
the new one for patches or questions yet. Feel free to post
questions/comment/concerns to this current list.
Stay tuned for more updates... A list of the content changes /
improvement being worked can be found
here:http://www.tianocore.org/news/2015/05/01/UnderConst.html
Since it has been about 2 months since this was sent, I was wondering if
there's any update regarding plans, timing etc.?
Joe is out of the office currently, so I'm going to take over on this
task. I plan to transition the list over the next week or two. (I'll
send out a separate email with the details.)
Note that compared to the original announcement the list has been
renamed from edk2 to edk2-devel.
https://lists.01.org/mailman/listinfo/edk2-devel
-Jordan
Jordan Justen
2015-07-15 23:20:44 UTC
Permalink
There is about 1 day until the transition to the new edk2-devel list.

To update git send-email, run this command in your edk2 tree:

git config sendemail.to edk2-***@lists.01.org

To configure Outlook for sending plain-text email to the list, I think
this page might be helpful:

https://support.office.com/en-za/article/Change-the-message-format-to-HTML-Rich-Text-or-plain-text-d92bba10-7ed4-4413-a031-7a1559112d90#__toc269980630

To sign up for the new list, visit:

https://lists.01.org/mailman/listinfo/edk2-devel

-Jordan
Post by Jordan Justen
Just to pick a transition time, let's change over ~2 days from now.
Thu Jul 16 23:00:00 UTC 2015
Thu Jul 16 16:00:00 PDT 2015
Fri Jul 17 07:00:00 CST 2015
https://lists.01.org/mailman/listinfo/edk2-devel
Let's try to not use the new list until then to let people have one
last chance to subscribe. Shortly after the cut-off, we'll reject
email sent to the old list.
-Jordan
Carsey, Jaben
2015-07-15 23:23:54 UTC
Permalink
Can we get the old list to auto-respond with some info?
-----Original Message-----
Jordan Justen
Sent: Wednesday, July 15, 2015 4:21 PM
Subject: [edk2-devel] 1 day until new edk2-devel email list transition
There is about 1 day until the transition to the new edk2-devel list.
To configure Outlook for sending plain-text email to the list, I think
https://support.office.com/en-za/article/Change-the-message-format-to-
HTML-Rich-Text-or-plain-text-d92bba10-7ed4-4413-a031-
7a1559112d90#__toc269980630
https://lists.01.org/mailman/listinfo/edk2-devel
-Jordan
Post by Jordan Justen
Just to pick a transition time, let's change over ~2 days from now.
Thu Jul 16 23:00:00 UTC 2015
Thu Jul 16 16:00:00 PDT 2015
Fri Jul 17 07:00:00 CST 2015
https://lists.01.org/mailman/listinfo/edk2-devel
Let's try to not use the new list until then to let people have one
last chance to subscribe. Shortly after the cut-off, we'll reject
email sent to the old list.
-Jordan
_______________________________________________
edk2-devel mailing list
https://lists.01.org/mailman/listinfo/edk2-devel
Jordan Justen
2015-07-15 23:38:50 UTC
Permalink
Post by Carsey, Jaben
Can we get the old list to auto-respond with some info?
Yes. That is my plan. Similar to when we moved edk2-buildtools-devel
to edk2-devel...

(Hmm, I may need to update the buildtools list message too. :)

-Jordan
Post by Carsey, Jaben
-----Original Message-----
Jordan Justen
Sent: Wednesday, July 15, 2015 4:21 PM
Subject: [edk2-devel] 1 day until new edk2-devel email list transition
There is about 1 day until the transition to the new edk2-devel list.
To configure Outlook for sending plain-text email to the list, I think
https://support.office.com/en-za/article/Change-the-message-format-to-
HTML-Rich-Text-or-plain-text-d92bba10-7ed4-4413-a031-
7a1559112d90#__toc269980630
https://lists.01.org/mailman/listinfo/edk2-devel
-Jordan
Post by Jordan Justen
Just to pick a transition time, let's change over ~2 days from now.
Thu Jul 16 23:00:00 UTC 2015
Thu Jul 16 16:00:00 PDT 2015
Fri Jul 17 07:00:00 CST 2015
https://lists.01.org/mailman/listinfo/edk2-devel
Let's try to not use the new list until then to let people have one
last chance to subscribe. Shortly after the cut-off, we'll reject
email sent to the old list.
-Jordan
_______________________________________________
edk2-devel mailing list
https://lists.01.org/mailman/listinfo/edk2-devel
Loading...